LM Cases

This case was designed for Yamaha Commercial Audio. The case is designed to hold 6 Yamaha IF2205 speakers in a custom CNC cut foam insert. There is also a large accessory area for flyware or any cables. The exterior case is built out of 3/8″ ata and features stacking caster wells, 3.5″ casters and a [...]

This case was built for Visual Aids Electronics. The case is designed to hold a complete Bose L1 Speaker system. The system subwoofer is kept in a hinged storage compartment in the front of the case. The foam is notched on the compartment lid to allow the lid to sit just beyond 90 degrees so [...]

This case was built for Overland Pro Audio. The case is designed to be a combination lift off/hinged lid which we refer to as our “M-Style” case closure. The case tray features a CNC cut insert to nest the trapezoidal cabinets next to each other. The hinged top portion of the lid hold all the [...]

This case was designed for Nomad Sound. The case is designed to hold 2 Nexo 45 n12 monitors on their sides to achieve an exterior truck pack dimension of 30″ x 24″. The wedges are held in a custom CNC cut insert to hold the unique angle of the cabinets. The angled pieces of foam [...]

This case was designed and built for Maryland Sound International. The case is designed to hold 4 Outline Mini Compass line array elements. Two elements are rigged together and placed in a custom CNC cut foam insert, there are also custom foam cut outs for 8 splay bars between the two sections. The portion of [...]

This case is designed to hold a single JBL VRX 918S/P. Because the exterior dimensions of the subs are the same both the 918S and 918P will fit in this case. The case is built out of 3/8″ plywood and features a 1″ PE foam lined interior, 3.5″ casters and 4 recessed handles.

This case is designed to hold 2 QSC K8 loudspeakers. The case is built out of 3/8″ plywood and features individual foam lined compartments for each speaker. The exterior of the case features stacking caster wells in the lid and 3.5″ casters w/pad.

This case is designed to hold 2 JBL VRX 932LAP speaker cabinets. The cabinets ride on their sides in a 1″ PE foam lined case that features a divider to keep the speakers separated. The exterior case is built out of 3/8″ plywood and features 3.5″ Colson casters.

This case was designed for VA based sound company Overland Pro Audio. The case is designed to be modular allowing Overland to use the case for all types of events. The case is built to hold 4 D&B Audiotechnik Q1 line array elements rigged together, if fewer speakers are needed for an event the center [...]

Need a lightweight way to move two powered speakers? Try a Pelican Case! This case was made for DMR-Rents.com. The case provides storage for two Mackie SRM 350 speakers, power cords & instruction manuel. The PE foam insert was cut on our CNC saw to allow storage for the two SRM 350′s as well as [...]