LM Cases

This case is designed for the Presonus Studiolive 16.0.2 mixer. The case is built out of 1/4″ plywood to keep it lightweight and manageable. The case interior features a 1″ foam lined interior with strategic foam blocking to keep the mixer in place during transportation. There is a foam slot under the mixer for cable [...]

This case was designed for a Presonus Studiolive 24. The case features a 1″ foam lined interior and a custom 3/4″ Birch doghouse that contours the back of the board. The exterior case is made out of 1/4″ plywood and features 5 recessed handles.

This case is designed for the Presonus StudioLive 24.4.2. The case interior is lined with 1″ foam and is designed to allow easy access to the i/o section of the board as well as the front headphone jack. The exterior case is built out of 3/8″ plywood and features a pull off latched lid and [...]

This case was designed and built for Avex Inc. The case features a 2″ foam lined interior, and custom foam blocking to keep the mixer in place during transportation. The case is built out of 3/8″ plywood laminated with red ABS plastic. The exterior of the case features a custom silkscreen of the customer’s logo, [...]

This case is designed for the Presonus Studiolive 24.4.2 digital mixer. The case is built out of 1/4″ plywood and features recessed hardware in addition to a telescoping aluminum handle and 3″ inboard dolly casters. The case also features an accessory compartment behind the mixer for storage of peripherals such as cables, littlelites etc..

This design is based off our standard ATA case for the Presonus StudioLive, and adds our Tilt N’ Travel option. The Tilt N’ Travel option is comprised of a multi stage telescoping aluminum handle and inboard dolly casters allowing the case to be rolled like a piece of luggage. Our Tilt N’ Travel design is [...]

This case combines the best pro features of larger console cases and integrates them into a smaller package. The case features a 1″ foam lined interior with foam blocking around all critical components. The board is held in place by the custom doghouse that contours the back of the board along with a foam block [...]