LM Cases

(Click For Larger Image)

This case was designed for Visual Aids Electronics. The case holds a Holm AH17DX216A monitor. The monitor is suspended in a foam lined compartment to allow it to be used in the case and transported to events.

The case is built out of 3/8″ plywood and features 3.5″ casters and a trap door to access all the monitor inputs.

(Click For Larger Image)

(Click For Larger Image

(Click For Larger Image)

This case is designed for Axis Percussion Longboard A Double Pedals. The pedals are held in a custom CNC cut foam insert. The foam insert is designed to hold each of the pedals and both beaters in separate compartments. The insert is designed with durability in mind, the bottom of each pedal compartment features a piece of 1/4″ black plastic to prevent the velcro on the bottom of the pedals from ripping the foam over time. The case is built out of 1/4″ plywood to provide maximum protection at a minimum weight. The exterior case features 3 recessed handles.

(Click For Larger Image)

(Click For Larger Image)

(Click For Larger Image)

This case was built for Custom Media Services. The case is designed to be installed into a gym that teaches spinning classes. Our design was based around a user teaching a class on a spinning bike and operating all of the equipment within the rack.

The horizontal mixer section of the rack is covered with a clear Lexan door to ensure that if the teacher leans over the mixer mid workout they will not sweat on the console. The media is controlled via a Crestron controller which is recessed into the top of the rack behind the mixer section. The media is held on a 22″ Apple iMac computer mounted just behind the Crestron controller.

The rack is built out of 3/4″ Birch and finished with our proprietary black textured coating.

Special thanks to CMS!

(Click For Larger Image)

(Click For Larger Image)

(Click For Larger Image)

This case was designed for PSAV. The case holds a Samsung UN40EH6000F 40″ LCD monitor and accessories. The monitor is stored against a large center divider and surrounded by 2″ foam to provide maximum protection. The exterior case is built out of 3/8″ plywood and features stacking caster wells in the lid, 3.5″ casters, a 2 color custom silkscreen of the PSAV logo and 6 recessed handles.

Special thanks to PSAV!

(Click For Larger Image)

(Click For Larger Image)

(Click For Larger Image)

This case was designed for Pyrotechnico to hold 2 Sigma Services Flame effects. The effects are laid down and cradled in custom foam cavities. The controller and cables are stored in separate foam lined compartments for organization and protection on the road.

The exterior case is built out of 3/8″ plywood and rides on 3.5″ casters.

Special thanks to Pyrotechnico!

(Click For Larger Image)

(Click For Larger Image)

(Click For Larger Image)

This case was designed for Holy Family Church. The case provides individual compartments for each of the tiny elements of the portable mass kit. The individual compartments not only provide maximum protection for the items, they also allow the user to quickly see if a piece is missing.

Because of the amount of components to the kit, a product placement sheet is mounted in the lid to show what items are included in the kit and where they go in the foam insert.

The exterior case is built out of 1/4″ plywood to provide a light weight yet durable transportation solution.

(Click For Larger Image)

(Click For Larger Image)

(Click For Larger Image)

This case was designed for Cisco Systems. The case holds one Cisco CTS500-32 monitor with the base attached. The monitor is cradled in a custom foam lined compartment, the case interior also features a 4″ black carpet lined accessory compartment.

The exterior case is built out of 3/8″ plywood and features 3.5″ casters, 8 handles, and silkscreens of the Cisco logo as well as our standard “Delicate Electronics” and “International Shipping” logos.

Special thanks to Cisco Systems!

(Click For Larger Image)

(Click For Larger Image)

This case is designed for the Yamaha SKRM-100 Sub Kick. The Sub Kick and stand are held in a custom CNC cut foam compartment. The stand compartment is designed to hold the collapsed base and mount as one unit.

The exterior case is built from 1/4″ plywood and features 3 recessed handles.

(Click For Larger Image)

(Click For Larger Image)

(Click For Larger Image)

This case was designed for Imperial Trading as the center of their trade show support cases. The set of cases includes 3 – 50 capacity Acer Iconia cases (for more info on those cases CLICK HERE) and a custom power distribution case.

This case hold two mobile servers mounted on two slide out shelves mounted on HD Accuride glides. The case also contains a rack section that features a Tripplite RS/1215RA power strip, a 1RU drawer with a custom foam insert that holds a small monitor, a 2RU shelf, a 2RU sliding shelf, and a 6RU drawer with a custom foam insert that holds three wifi access ports.

Below the 18RU rack section is a custom power distribution case. The power distro was spec’d and designed by the LM Cases Custom Integration department. For more information on the power distro and case CLICK HERE

The exterior case is built out of 3/8″ plywood and features 4″ Colson casters and custom silkscreens of the Imperial Trading logo. All the rack mounted equipment and power distribution were provided by our in house CI department.

Special thanks to Imperial Trading!

Power Distro Rack

Custom Slide Out Server Shelves

Wifi Access Terminals In A 6RU Rack Drawer

2 RU Rackmounted Slide Out Shelf

Custom Foam Insert For Monitor In A 1RU Drawer

(Click For Larger Image)

(Click For Larger Image)

This case was designed for Imperial Trading and was handled by our in house Custom Integration department. The case is designed to hold 50 Acer Iconia tablets in the upright position. The tablets are held in custom crosslink foam inserts which accommodates the tablets as well as each tablets power cord. Crosslink foam is considered a Class A scratch free surface to ensure the tablets will not scratch inside the case.

Mounted below the tablets are TrippLite RS/1215 RA power strips that sum the tablets into 4 circuits per case. The top foam is designed to hold each units power cord and direct it down to the power strip, ensuring neat cable management. (this is illustrated in the photos below with an Apple iPad which happens to be a similar size)

The cases are designed to charge the tablets in a trade show setting, at the end of each day the tablets can be returned to the case and be charged while the case lid is shut and locked. To get maximum air flow, we CNC cut custom vents into the case lid.

The total system is comprised of 150 tablets (3 cases total) that need to charge simultaneously, our CI department created a custom 40 amp power distro to achieve this issue, check out that post here: CLICK HERE Because dealing with 40 amp power may be a bit intimidating to a non experienced operator, the CI department created custom laser etched instruction panels in each case with the operation instructions. The operation instructions correspond to the operation instructions on the power distro rack.

The exterior case is built out of 3/8″ plywood and features a custom silkscreen of the Imperial Trading logo, 4″ Colson casters, and stacking caster wells.

Special thanks to Imperial Trading!

(Click For Larger Image)

Crosslink Foam Insert w/TrippLite Power Strips Mounted Below.

iPad Stepping In For The Iconia To Show The Built In Cable Management

Custom Laser Etched Instruction Panel